Bike Mounts - Bike Mount - PDA Product Number: 215002 Product Name: Water Resistant Case Product Details The water resistant case has a protective hard shell with a soft transparent front for touch screen response Designed to allow easy placement and removal of the PDA The case is attached onto a tilt swivel for easy adjustment of the PDA screen and can be quickly and easily removed when leaving the motorcycle You can attach a charging cable or GPS serial module and also use a headfree headset when the PDA is enclosed in the case. Inner dimensions of the case are 85x152x2.85 cm. Fits the following handsets: Acer n10 Apple iPod Asus MyPal A620 Dell Axim X3 Dell Axim X5 Garmin iQue 3600 Handspring Egde, Deluxe Handspring Prism, Deluxe Handspring Treo 600 HP iPAX 41xx HP iPAX 43xx HP iPAX 19xx HP iPAX 22xx HP iPAX 55xx, 54xx, 39xx, 38xx, 37xx, 36xx series not expansionpack Plus or with 2 PCMCIA slots HP Jornada 545 HP Jornada 568 O2 XDA II Palm m500, m505 Palm Tungsten E Palm Tungsten T, T2 Palm Tungsten T3 Palm Zire 71 Toshiba e330 Toshiba e350 Toshiba e400 Toshiba e750 Toshiba e800

NO HOLES INSTALLATION: How to attach a holder to a dashmount 1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder 2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws 3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate 4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw