Coming early 2008. Contact your C1 Defence Systems Dealer for more information.
CE 1000 CORE ARCHITECTURE
PROCESSOR PXA 270 @ 400 Mhz
MEMORY 128/256 MB FLASH
128/256 MB RAM
DISPLAY 640 x 480 pixels (VGA) 256K Colours min 3.5” TFT with Touch Screen
Visible with direct sun light
Night vision compliant
Shock resistant
LED 1 Power On / Charge LED
AUDIO AC ‘97 codec
On board microphone with noise cancellation
On board integrated speaker for high noise environment
I/O 1 USB Device
1 USB Master
1 Audio earphone stereo jack
WPAN Bluetooth Class 2 - integrated antenna
or
Zigbee – integrated antenna
WLAN Integrated IEEE 802.11b/g – integrated antenna
OTHER DEVICES Integrated Accelerometer
Integrated electronic compass
Biometric fingerprint reader
EXPANSION SLOTS 1 user accessible memory card
OTHER EXPANSIONS 1 expansion connector for 1 optional module
KEYBOARD Cursor pad
Virtual qwerty on screen
SYSTEM ARCHITECTURE
PEN DEVICE Stylus
OPERATING SYSTEM WINDOWS CE 6.0
LINUX based on Kernel 2.6
APPLICATION DEVELOPMENT SYSTEM CE: Microsoft Platform Builder & EuroTech SDK for CE
LINUX: Eurotech SDK for Kernel Linux 2.6
CASE Ultra resistant
WEIGHT 650 grams (23 ounces)
BATTERY PACK
POWER 3.6 V Li-Ion Interchangeable (hot swappable) Battery Pack
Standard and Extended Capacity (optional)
ADD-ON MODULES (one module only)
STANDARD Connector 1
·
Power in
·
USB Master
·
USB Slave
·
Maximum current available on USB ports: 500 mA
Connector 2
·
Analog Audio I/O
WWAN GSM/GPRS/EDGE/UMTS or TETRA
Internal antenna + External antenna connector with automatic/manual antenna switching
capability
GPS Minimum 16 channels receiver with very high sensitivity (receive inside buildings)
DGPS and SBAS (WASS,EGNOS) support
Internal antenna + External antenna connector with automatic/manual antenna switching
capability
WWAN + GPS GSM/GPRS/EDGE/UMTS or TETRA
Internal antenna + External antenna connector with automatic/manual antenna switching
capability
On board microphone with noise cancellation
On board integrated speaker
Minimum 16 channels receiver with very high sensitivity (receive inside buildings)
DGPS and SBAS (WASS,EGNOS) support
Internal antenna + External antenna connector with automatic/manual antenna switching
capability
RFID !3,56 MHz ISO 15693 & 14443 A/B with integrated antenna
Agency Approvals
Emissions EN55022 (CISPR22) Class B
FCC 15. Class B
DOC Class B
CE Mark
MIL-STD 461
Immunity EN55024
FCC 15, Class B
DOC Class B
MIL-STD 461
Safety UL and cUL listed, UL 1950 third edition
TUV T- Mark, EN60950
UL and cUL listed, UL 1604 with all batteries and all wireless radios
ATEX Zone 2, Category 3
Accessories
Battery Charging External universal power supply
Multiple battery charger
External 12/24 V charger
Cigarette lighter power supply
Audio Adapter Converts into 2.5mm stereo jack
USB Device Adapter cable Converts into USB Device connector “A” type
USB Master Adapter cable Converts into USB Master connector “A” type
Environmental specifications
Temperature Operating: -4° to 140° F (-20° to 60° C )
Storage: - 40° to 167° F ( -40° to 75° C)
Cold Boot (battery): 32° F (0°C) @ 70% charge
Cold Boot (AC adapter): any
MIL-STD 810F methods 501.4 and 502.4
Thermal shock 1.5°C < 5°C / minute over -20°C to 60°C
Humidity 0% to 95% non-condensing
MIL-STD 810F method 507.4
Transit shock Up to 4' drop to concrete, all surfaces, edges, and corners
MIL-STD 810F method 507.4
Crash shock 75g, 11ms, Terminal saw tooth
MIL-STD 810F method 516.5
Vibration 0.4g^2/Hz, 20Hz - 1000Hz
6dB/octive 1000Hz - 2000 Hz
MIL-STD 810F method 514.5C-17
Vehicular vibration Composite wheeled vehicle method
MIL-STD 810F method 514.5C-17
Altitude Operational 24.000 ft
Storage 40.000 ft
MIL-STD 810F method 500.4 Procedure 1
Enclosure class Immersion in 150 cm of water
MIL-STD 810F method 512.4 procedure 1
Sand & dust: Particle size < 149 µm, 10 ±7 g/m3 particle density, 1.5 m/s to 8.9 m/s wind
speed
MIL-STD 810F method 510.4 procedure 1
IP 67 equivalence
Salt fog: 5% saline for 48 hours (12 wet, 12 dry, 2 cycles)
MIL-STD 810F method 509.4
Solar radiation: 120 W /m2 (355 Btu/ft2/hr) UVB @ 50°(7X24 hr cycles)
MIL-STD 810F method 505.4
Contamination by fluids: detergents, brake fluid, aromatic hydrocarbons
SPECIFICATIONS AND FEATURES SUBJECT TO CHANGE WITHOUT NOTICE
